Categories
Amateur Radio Antenna Plans

7 Elements Yagi for 146Mhz band build

Owner: Mr. Jonathan Mendoza – DY3BSW (Blackshadow), QTH: Marilao, Bulacan

To those people following my facebook page, this website and sending me a private message asking for the measurements, as promised – though it took a while, the diagram is finally out. Similar build instructions and materials are used same as my previous antenna builds.

Material list for building a 7 Elements 2m VHF Yagi

1. 1″ X 0.5″ Rectangular Aluminum tubing for the boom
2. 3/8″ Aluminum tubing for antenna elements
3. 1cm Outside diameter antenna tubing for elements holder
4. 1pc SO239 connector
5. Pop rivets / Rivet tool
6. #12 AWG Copper wire with insulation (12″for Gamma match)
7. Soldering iron
8. 14pcs Stainless steel nuts and bolts 20mm length 3mm diameter
9. 1pc, Butterfly nut and 1 bolt 18mm length 3mm diameter
10. Aluminum plate 0.5mm thickness
11. Collapsible tube (shrinkable tubes)

Cut the materials according the the measurements here:

7 Elements Yagi 146Mhz band

Download the PDF Document here

Antenna pattern simulation using 4 Nec 2

Combined antenna pattern 146Mhz gain as color

Horizontal pattern

146 Mhz Horizontal Pattern

Vertical pattern

146Mhz Vertical Pattern

Combined pattern / approximate gain / beam width

146Mhz combined Pattern

7 Elements yagi configured in vertical 2 stacked antenna tuning video (frequency response) using N1201SA antenna analyzer

The same antenna configuration frequency response and calibration is confirmed using NanoVNA antenna analyzer

So what gamma match to use on this build?

You can use the gamma match measurements that I used on 4 Elements Yagi build. You can follow this link to see the gamma match diagram: https://dw1zws.com/building-the-gamma-match-for-4-elements-yagi/

So that’s it, I hoping that it will help you somehow in building your own 7 elements yagi antenna. If you found this post interesting please consider subscribing on my youtube channel https://www.youtube.com/c/EphraimGariguez or follow me on my facebook page https://www.facebook.com/panda.antenna. Cheers and 73!

2 replies on “7 Elements Yagi for 146Mhz band build”

Possible but you have to re-calculate, easiest way is find an antenna program that calculates a yagi antenna for your specific frequency. Sorry I don’t provide tutorial here on how to compute for specific length or adjustment, those can easily be found on the internet. Its your responsibility as a home brewer to discover it yourself and understand the details. I just share my work for reference to those interested in home brewing, but I don’t spoon fed, unless we are in a classroom setting.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.