Categories: Antenna Plans

Build a Sleeve Dipole Antenna for 2m VHF

Sleeve Dipole Antenna
Build a 2m VHF lightweight sleeve dipole antenna. A compact portable antenna and easy for deployment. You can even operate the dipole while holding it. Building it is easy just follow the antenna plans below. The antenna specifications are below including the testing video.

Antenna Gain: 3dBi
Pattern: Omni
Features: Lightweight and Portable easy deployment


MATERIALS
3/8” round tube aluminum
1” round tube aluminum
2pc rubber or plastic stopper
2pc self tapping screw
RG58 Coax
SO239 or PL259 Connector
Hose Clamp

Wiring the Feedpoint

Antenna Measurements
[pdf-embedder url=”/site/wp-content/uploads/2018/07/SleeveDipole.pdf”]

Performance Testing



Ephraim Gariguez

View Comments

Recent Posts

Zastone Radios Software

The following are software for radios by Zastone Technology this is publicly and freely available…

2 months ago

PHP 8.2 FPM Tuning

This is a personal note for myself to remember the process I used to tune…

3 months ago

Kicad 6.0 Fix or Workaround for OpenGL required version 1.5

Kicad 6.0 is an schematic entry and pcb layout editor software that is popularly used…

2 years ago

2 Elements Yagi VHF antenna for 144Mhz

If you liked the 3 elements yagi, this antenna build is very close to the…

2 years ago

2 Elements Yagi UHF antenna for 410Mhz

This 2 elements yagi antenna is intended for the 70cm UHF band center frequency is…

2 years ago

WLN Softwares

WLN UHF Radio programming softwares and image for the following models below. The small radio…

2 years ago